Wednesday, December 28, 2011

JOB Pertamina – Medco E&P Tomori Various Vacant Position

JOB Pertamina – Medco E&P Tomori
Closing date: December 28, 2011



JOB Pertamina – Medco E&P Tomori is joint operating body between PT
Pertamina Hulu Energi and PT Medco E&P Indonesia.
We are one of the national oil & gas companies based on Jakarta,
Indonesia. Our project in Central Sulawesi offshore (Senoro) has been
operating since February 2011.
We are currently inviting highly dynamic, self-motivated and committed
applicants.
To apply several positions in a challenging work environment as follow:

Mechanical / Piping Field Construction Engineer
(Sulawesi)

Responsibilities:
• Control, review, check, inspect and supervise construction
activities, especially in mechanical / piping work.
• Analyzing on lifting of heavy equipment installation.
• Resolves any contractual/legal matters and takes action.
• Analyze exposure to risk and quantify potential for losses.
• Interface / mediate between various engineering disciplines and departments.

Requirements:
• Candidate must possess at least a Bachelor s Degree in Mechanical /
Chemical Engineering.
• Min. 10 years in construction of oil-gas facilities, involving.:
piping fabrication, installation work, welding and its inspection on
piping work, mechanical installation work, lifting of heavy equipment
installation, etc. Engineering Consultancy or EPC company in Oil & Gas
sector).
• Understand standard engineering specifications, Oil & Gas process
codes and applicable international codes, i.e.: ASME, API, ANSI, AWS,
etc.
• Demonstrate knowledge of various engineering discipline.
• Familiar with project specifications.
• Familiar with safety and environmental requirement.
• Familiar with reporting system.
• Speak and write English in good proficiency.

Instrument Field Construction Engineer
(Sulawesi)

Responsibilities:
• Control, review, check, inspect and supervise construction
activities, especially in instrument work.
• Resolves any contractual/legal matters and takes action.
• Analyze exposure to risk and quantify potential for losses.
• Interface / mediate between various engineering disciplines and departments.

Requirements:
• Candidate must possess at least a Bachelor s Degree in Physical Engineering.
• At least 16 years of working experience in the related field is
required for this position (Min. 10 years in construction of oil-gas
facilities, involving.: GTG assemble, Switchgear, UPS, DCS, ESS, SCADA
installation, etc. Engineering Consultancy or EPC company in Oil & Gas
sector).
• Understand standard engineering specifications, Oil & Gas process
codes and applicable international codes, especially construction of
upstream facilities.
• Demonstrate knowledge of various engineering discipline.
• Familiar with project specifications.
• Familiar with safety and environmental requirement.
• Familiar with reporting system.

Instrumentation Inspector
(Jakarta – Site)

Responsibilities:
• Responsible to QA/QC Coordinator for all construction activity
related to Quality Assurance & Quality Control and Ensure that QC
Contractor has conduct examination for all instrumentation equipment
accord with the approved procedure.
• Responsible for all instrumentation equipment bought by EPC
Contractor such as PSV and gas meter has passed the test in the
factory and completed with validated document.
• Ensure fabricated gas meter has comply with the AFC Drawing and suit with ITP.
• Coordinate with QC Contractor for gas meter, instrumentation
equipment and calibration any equipment related with gas meter.

Requirements:
• Bachelor degree in any major of Engineering.
• Minimum 10 years experience in field instrumentation Migas operation.
• Understand instrument engineering document/drawing : specification,
data sheet, wiring/loop diagram, instalation/hook up, P & ID.
• Understand instrumentation testing procedure : calibration, leak
test, continuity test, loop test, function test and SA (Surge
Arrestor).
• Understand certification procedure including with Migas/BP Migas :
metering, PSV.

Drilling Support Engineer
(Site)

Responsibilities:
• Prepare and review drilling rig contract, services and procurement
including technical estimation for tender to support drilling
operation.
• Arrange cost estimation/calculation for wells drilling and other
support facilities, monitor and analyze the drilling operation in
order to make it accordance with the budget.
• Monitor drilling operation activity and support drilling program
continuity in accordance with the plan.
• Review operation and contract strategy for all operation to get an
optimum wells drilling.
• Planning transportation for material & equipment mobilization
process in coordination with Drilling Superintendent & Operation
Engineer.
• Administration duties for all payments of purchasing activities ,
operation and material delivery process (PO, WAN, etc).
• Making recapitulation data of all material usage and budget expense
of drilling project in coordination with Field Administrator and
Operation Engineer.
• Conduct close-out process with Section Head and auditing with
internal or external party.

Requirements:
• Bachelor Dgeree in Petroleum, Mechanical, Civil, Chemical,
Electrical, and Industrial Engineering.
• Minimum 3 years experience in drilling of oil and gas operation.
• Certified in Drilling Technique.
• Certified PTK 007 BPMIGAS.

Pressure Vessel & Tank Inspector
(Jakarta)

Responsibilities:
• Responsible to QA/QC Coordinator for all construction activity
related to Quality Assurance & Quality Control.
• Responsible for all aspect and vessel & tank fabrication phase
bought by the contractor including the instrumentation such as PSV,
glass level, PCV, etc. has examined at the factory and the Fabricator
has complete it with validated document.
• Ensure all fabrication personnel who is responsible for vessel tank
fabrication has the authority to accomplish the equipment fabrication.
• Ensure that local fabricator has comply the construction aspect and
Migas level aspect.
• Ensure that QC Contractor has examined the equipment in accordance
with approved procedure.
• Verify that the contractor has conduct material checking and other
necessary test.
• Ensure all welder, welding procedure and testing procedure has been
reviewed and approved, also ensure that all personnel certification
has accordance with their qualification.
• Ensure all test equipment like pressure & temperature gage, dead
weight tester has comply the validated certification.
• Coordinate with field Construction representation to conduct SAT
witnessed by Migas official.
• Coordinate with contractor for all documentation aspect related to
SKPP & SKPI.

Requirements:
• Bachelor degree in engineering (any major).
• 10 years experience in fabrication inspection & tank hoarder Migas Operation.
• Certified as Pressure Vessel & tank hoarder Inspector from Migas.
• Understand Engineering doc/drawing : specification, data sheet, P & ID.
• Understand testing procedure for Vessel tank hoarder.
• Understand MIGAS/BPMIGAS certification procedure for hydrotest
pressure vessel, leak test tank hoarder.
• Experience in checking, testing and equipment installation for
pressure vessel and tank hoarder instrumentation such as : flame
arrestor, bretaher valve, gas meter, etc.

Electrical Engineer
(Jakarta)

Responsibilities:
• Review and comment EPC deliverables, assist and perform such
required independent electrical designs under the direction of the
company Electrical Lead Engineer.
• Well known use and operate of the electrical various software
application such as ETAP, Chalmlite.
• Inspect electrical device during FAT and SAT.
• Communication with other discipline ( process, instrument,
mechanical, piping, civil ) to ensure that the design is properly and
meet to COMPANY requirement.
• Well familiar with the provisions of the codes, standards and
recommended practices in oil and gas industry such as NEC, API, NFPA,
IEC, IP 15 etc.
• Communication with other party i.e. EPC Contractor, BPMIGAS, MIGAS
in order to electrical work meet to COMPANY requirement including
support obtaining license and certificate from government (MIGAS).

Requirements:
• Bachelor science degree in power system electrical engineering.
• Have experience minimum five (5) years in the electrical design of
oil and gas production facilities.
• Well known use and operate of the electrical various software
application such as ETAP, Chalmlite.
• Well familiar with the provisions of the codes, standards and
recommended practices in oil and gas industry such as NEC, API, NFPA,
IEC, IP 15 etc.

Environment Engineer
(Site)

Responsibilities:
• Provide Environmental performance index and practicable periodic
Environmental programs.
• Assist HSE Coordinator to control project Environmental programs.
• Capable to define related Environmental regulations requirement
regarding project.
• Evaluate existing Environmental policies and procedures or create
new policies and procedures.
• Capable to communicate actively to all construction leaders,
including contractor s leader to ensure work activities are comply
with company and government HSE regulations.
• Provide periodic reporting on programs and activities to HSE Coordinator.
• Provide and exercise Environmental statistical data.
• Capable to provide Environmental data trending analysis.
• Capable to determine any Environmental issue, including to analyze
and to propose recommendation.
• Able to use advanced principles of biology, chemistry, and
environmental science to protect wildlife and natural resources as
well as human life.
• Capable to work on a variety of serious environmental issues, for
example: design municipal water supply and industrial wastewater
treatment systems; assess recycling and reclamation processes; conduct
hazardous waste management studies; and consult on the environmental
effects of various construction projects.
• Advise industries and government agencies about efficacy of
environmental policies and standards.

Requirements:
• Bachelor degree in Engineering and Environmental science or other
related discipline.
• Having minimum 5 years experience in related fields and minimum 1
year in supervisory position.
• Computer literate; Auto-CAD is mandatory.
• Fluent in English.
• Familiar with Health and Safety aspects in oil and gas industries,
especially in oil-gas production facilities construction.
• Experience in developing UKL-UPL and AMDAL; Environmental management
system will be an advantage.
• Familiar with HSE codes and standards, i.e.: NFPA, API, etc.
• Willing to travel frequently to remote area (outside Java).

Completion Engineer
(Site)

Responsibilities:
• Making database summary of completed drilling project for comparison
data to the next drilling program/plan (Offset Well Data).
• Designing well and details of drilling program for a well
construction project (onshore & offshore) including all
technical/engineering plan, cost estimation, material purchase plan
and drilling equipment (Well Construction Program).
• Preparing cost estimation proposal and technically presented the
plan to BPMIGAS to get an approval for executing the project (AFE &
WP&B).
• Searching and analyze necessary material & equipment to be applied
in the drilling project and estimate risk & cost analyst (Technology
Scouting).
• Analyze and plan optimalization well design, drilling & completion,
and overall budget proposal from the drilling summary result made by
Drilling Superintendent.
• Supervise HQ activity, assist Drilling Superintendent to conduct
quality control process (QC) during drilling project.

Requirements:
• Bachelor Dgeree in Petroleum, Mechanical, Civil, Chemical,
Electrical, and Industrial Engineering.
• Minimum 3 -5 years experience in drilling of oil and gas operation.
• Certified in Drilling Engineering / Operation.
• Certified well control (IWCF - Surface / subsea stack).
• Certified in T-Bosiet (Sea Survival, HUET, Fire Fighting).

Contract Engineer
(Jakarta – Site)

Responsibilities:
• Develop and analyze subcontract documentation (interpretation of
contract scope and terms and conditions).
• Provide advice and seek counsel on contractual, commercial,
taxation, insurance and legal issues.
• Coordinate subcontracts development, compilation, sourcing,
pre-tenders, invitation to tender, evaluations of proposals received
including requests for qualifications.
• Post award coordination of Subcontract Variations, including
evaluation of Subcontractor s claims and defending claims from
Subcontractors.
• Participate in Subcontract audits, reviewing records for accuracy
and conformance to standards.

Requirements:• Bachelor Degree in Engineering any discipline.
• Minimum 10 years professional experience, 5 years Project Contracts
experience in EPC projects will be an advantage.
• Certified BP Migas PTK 007 Rev-2 Certification in Supply Chain Management.
• Experience in contract formulation activities, systems and processes
coupled with working knowledge of engineering, fabrication and
construction practices.
• Good skills in Ms Word and Ms Excel.

Construction Superintendent
(Jakarta – Site)

Responsibilities:
• Responsible to QA/QC Coordinator for all construction activity
related to Quality Assurance & Quality Control, including ERW pipe
quality, pipe line, fitting pipe and valve.
• Coordinating with pipe factory QC to monitor the ERW pipe quality seamless.
• Responsible to ERW pipe quality or seamless bought from inside and
out of country.
• Verify the processing of ERW pipe production from the pipe mill
process until it comply the standard and certificate issued by pipe
mill from Indonesian factory or pipe material, valve and pipe fitting
imported from out of country.
• Ensure that contractor has conducted material checking : pipe line,
pipe fitting and leak test valve that bought by EPC Contractor before
deliver it to the job site.

Requirements:
• Bachelor Degree in Metallurgy or Mechanical Engineering.
• 10 years experience in pipeline construction.
• Certificated as pipeline inspector.
• Certificated as welding inspector.
• Familiar with standard code ASME, ASTM, ANSI, ANT TC 1A, API, DNV, SNI.

Untuk informasi lebih lanjut silahkan masuk ke website kami di

http://www.id-recruitment.com/tomori


No comments:

Post a Comment